Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: New TRA = Victory

  1. #11
    Senior Member
    Join Date
    May 2010
    Location
    Southern California
    Posts
    475
    For securing the under seat pouch I slip one of those velcro straps used for wiring just under the set pan. I think it could go between screw, if loosed some before tightening again, if I felt it necessary, but the thing has never wandered. Those longer velcro straps are very strong and handy for many things.

    I like the solid color look.

  2. #12
    Senior Member
    Join Date
    Apr 2012
    Location
    Orlando, FL
    Posts
    695
    what do you think of the solid seat pan, so far? I've always wondered about doing that.
    Rollin' since '89. Complete C8

  3. #13
    Quote Originally Posted by Crappler View Post
    what do you think of the solid seat pan, so far? I've always wondered about doing that.
    TBH I haven’t sat on it for a long period of time yet. I think time will tell, gotta take her down a few curbs. I switched to solid mostly because my fabric ones always end up sagging. The cushion I have is so darn thick I doubt I’ll notice much difference in comfort/firmness.

  4. #14
    So much stuff to do to adapt to the new box frame. The old underwear bag I used to use won’t work any more because of the extra frame bars underneath so I’ve had to order a new smaller bag. Plus I need to wrap some frame protectors onto the underframe before I hang my key bak key ring on there because it’s probably gonna hang down far enough to scratch the frame.

    for my toiletries bag, I’m thinking about mounting it using some neodymium magnets to attach it to the seat pan to keep it up and out of the way, so now I gotta find a new bag to carry as well.

  5. #15
    Senior Member
    Join Date
    Nov 2012
    Location
    Southeast, USA
    Posts
    610
    You may want to look into helicopter tape for your frame. Would probably be easier and cleaner looking than paracording your whole frame. A friend of mine wrapped his, there is a video on youtube. You can remove some of those screws from your seat pan if you need to fit your bag strap under it. My carbon seat pan isn't bolted at all, just velcro and it has never moved. Also, if your only swapping one or two spokes out you can probably true it yourself. Just lay your chair on its side so you can spin the wheel freely and tighten/loosen the new spokes until it doesn't wobble (replace/balance one at a time). I swapped all 6 outside spokes on each of my wheels and had to have a bike shop balance it, but if it was just a few it may have been manageable. You can always try yourself first, then take it in. Good looking chair by the way

  6. #16
    Quote Originally Posted by Brad09 View Post
    You may want to look into helicopter tape for your frame. Would probably be easier and cleaner looking than paracording your whole frame. A friend of mine wrapped his, there is a video on youtube. You can remove some of those screws from your seat pan if you need to fit your bag strap under it. My carbon seat pan isn't bolted at all, just velcro and it has never moved. Also, if your only swapping one or two spokes out you can probably true it yourself. Just lay your chair on its side so you can spin the wheel freely and tighten/loosen the new spokes until it doesn't wobble (replace/balance one at a time). I swapped all 6 outside spokes on each of my wheels and had to have a bike shop balance it, but if it was just a few it may have been manageable. You can always try yourself first, then take it in. Good looking chair by the way
    Thanks, I haven't heard of helicopter tape before. I just youtubed it, definitely looks easier than my paracord method, but I wonder if the tape wont just end up getting scratched as well. I'm envisioning this chair getting slung across rough concrete by accident several times... it seems unlikely the tape would be up to that job. I'll probably just waste my time and wrap the heck out of it with paracord, then after I get used to the transfers for a couple months and I'm not dropping it often I'll start removing the paracord. I don't mind keeping a bit of paracord wrap on it, especially on the "knee" part of the downtube with this skinny frame, gives my hand more to grab onto when I'm transfering, and plus if I need a couple dozen feet of paracord for some reason I can always quickly whip off the paracord wrap (as if that would ever happen).

    That's a good point about the spokes. I might as well give it a shot. Worst case scenario I just do what I was gong to do anyway and take it to a bike shop.

Similar Threads

  1. Victory Over Paralysis
    By manouli in forum Spinal Cord Injury News
    Replies: 0
    Last Post: 03-20-2007, 11:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •