Page 1 of 5 12345 LastLast
Results 1 to 10 of 52

Thread: Fold out ramp hitting another car

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Fold out ramp hitting another car

    As many of you know, I'm picking up the replacement of my 2018 Pacifica to a 2019 Pacifica foldout due to a mistake in drop depth of the floor they made. It just hit me the fold out is around 5" longer than infloor. Am I going to have more of a challenge with enough space to get out of the van? Is there a difference in the ramp angle between the 13 and 10" drops. I hope more then there'll be more space in the cross hatches. Didn't occur to me til just now and have only seen the 13" drop. Dang, hate the second guessing. Sure would hate to hit a car parked next to me with the ramp. I'll be using a ZX1 so no worries on ramp angle.

  2. #2
    Senior Member pfcs49's Avatar
    Join Date
    Aug 2013
    Location
    NW NJ ***********T12 cmplt since 95
    Posts
    1,718
    Just chop off ramp until the ZX1 stalls on it, then weld the last piece back on.
    No Problem
    69yo male T12 complete since 1995
    NW NJ

  3. #3
    There goes the warranty tho.
    Art

  4. #4
    Quote Originally Posted by pfcs49 View Post
    Just chop off ramp until the ZX1 stalls on it, then weld the last piece back on.
    No Problem
    There goes the warranty doing that?
    Art

  5. #5
    Senior Member pfcs49's Avatar
    Join Date
    Aug 2013
    Location
    NW NJ ***********T12 cmplt since 95
    Posts
    1,718
    Quote Originally Posted by Art454 View Post
    There goes the warranty doing that?
    Warranty??!!!
    We don't need no stinking' warranty!
    69yo male T12 complete since 1995
    NW NJ

  6. #6
    Quote Originally Posted by pfcs49 View Post
    Warranty??!!!
    We don't need no stinking' warranty!
    I would. They had to replace the module in mine. Not cheap. Good thing it was under warranty.
    Art

  7. #7
    Yep, I'm sure they'd use any excuse to void a warranty. Especially when it's cost Braun 5 grand already. It's ready tomorrow around 1 but will wait until Monday morning to pick up. I don't want to drive in the big city traffic on a Friday afternoon. Dang I'll be glad when this over and done with.. Thanks guys for the support, it's nice to be able to get feedback from others who actually own a converted van.

  8. #8
    Five inches is quite a lot, but the change may be insignificant. It depends how far inside the Pacifica the measurement begins. Your ZX1 is probably easier on the ramp than my IGlide since your power wheels are inside your wheelchair wheels. I get nervous one my wheelchair wheels is going to catch a ramp rail especially going downhill. It's a pretty tight fit.
    I have had periodic paralysis all my life. I lost my ability to walk in 2011 beginning with a spinal block, which was used for a hip fracture caused by periodic paralysis.

  9. #9
    Sorry, I kinda would like the extra length. We been use to lift but since using transit for transportation that usually use minivans which kinda harder to get use to going up. Mama has raised front wheels up going into van. Happy that the driver onhand to keep chair from falling. They have couple rear entry mins that backing out with 6 wheels I bump sides til rear castors turn all way round, little nervous first couple times thinking going over ramp lip/rail.
    Course you probably right about ramp location in the van may make the difference since got further to clear.
    Just wait and see and try not to second guess til try it yourself. My KlearVue Lift is long one and took awhile get use to just how much further it suck out when deployed but got hang of allowing more room. Finally got to where never thought about it, just automatic to allow more space.

  10. #10
    Thanks guys. I was thinking the same pfc about shortening the ramp if gets in the way. I measured from basically the same distance at the door Nonoise. I can tell just by looking the fold out looks longer. Course the infloor is a 10" drop the fold out is 13 or 14" drop. Checking with a dealer in Oregon, he thought the fold out 10" was 9.1o, 14 9.0o and infloor 9.9o so not much different in angle; just a little concerned about length. Mike, I think you said it best. Wait to see and not second guess myself.

    Several options if I feel too long. Just checking with those who own one or knowledgable. So many ingenius people on the forum for sure. thanks. The new leather should be done today or tomorrow, then transfer the equip. they installed and drive down to pick up. Gonna miss my old rattletrap but don't think my wife will.
    Last edited by Patrick Madsen; 07-11-2019 at 03:21 AM.

Similar Threads

  1. Replies: 0
    Last Post: 10-07-2016, 12:02 PM
  2. Replies: 17
    Last Post: 11-23-2012, 10:18 PM
  3. Invacare MVP?? To fold or not to fold?
    By ChopperChick in forum Equipment
    Replies: 33
    Last Post: 08-04-2006, 12:51 AM
  4. anyone hitting the crappies?
    By ~Patrick~ in forum Recreation, Sports, Travel, & Hobbies
    Replies: 7
    Last Post: 05-30-2003, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •