Results 1 to 2 of 2

Thread: What size axles do I need?

  1. #1

    What size axles do I need?

    hello folks,

    I'm trying to put together a Topend chair and Spinnergy LX wheels. However, all the axles I have are too short! The longest pair I have is 4.5 inches. Any ideas as to what size I need and should start my search for? I'm excited about using this chair, so pleas help.

    Thanks!
    Last edited by s2sgacia; 09-13-2015 at 11:35 AM.

  2. #2
    I just recently had to figure this out too.
    what I did
    was first measure from bottom of nut to push pin on the axle I had
    then put the axle in through each hub and mark a line at its exit point, on the inner of the hub
    then measured the difference between those two lines and added it to the axle length I measure to get my new needed length

Similar Threads

  1. quick release axels
    By randomryan007 in forum Equipment
    Replies: 9
    Last Post: 02-11-2012, 04:34 PM
  2. Colours Wheels and Axels
    By LambOfJesusFreak in forum Equipment
    Replies: 4
    Last Post: 08-10-2008, 09:13 AM
  3. need help with qr axels
    By amyk in forum Equipment
    Replies: 0
    Last Post: 06-22-2007, 03:21 PM
  4. Lubricating Axels ???
    By Bake in forum Equipment
    Replies: 12
    Last Post: 10-10-2006, 06:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •