Results 1 to 6 of 6

Thread: Can I use a bigger tube for my wheel size?

  1. #1

    Can I use a bigger tube for my wheel size?

    Hey, I just got my wheels and tubes in the mail (25-540) wheels but they sent one of the tubes the wrong size (32-540). Would it hurt anything if I used it? Would it make that much of a difference?

  2. #2
    Senior Member ~Lin's Avatar
    Join Date
    Nov 2011
    Location
    Indianapolis, IN
    Posts
    3,070
    The 540 is more important, I think those tubes will be fine. Most tubes fit a small range of sizes. I haven't had any problems using tubes from my 1 3/8 inch tires when I switched to 1 inch right runs. However I didn't feel comfortable using a 'universal' tube I had even though I t should have been fine for that size. It was much wider than the tubes from my 1 3/8 which made me uneasy.
    Board Member of Assistance Dog Advocacy Project working in Education. Feel free to ask me any service dog questions!

    I am not paralyzed. I have a genetic connective tissue disorder with neuro complications and a movement disorder.

  3. #3
    Senior Member
    Join Date
    Jul 2007
    Location
    SW Florida
    Posts
    2,698
    It should be fine. Some people actually feel that using a tube that's slightly wider is better since it stays thicker when inflated. I think the right size is usually best, though. Kinda dumb that they sent you two different size tubes though.

    Just be careful installing the larger tube so that is doesn't get folded or pinched.

  4. #4
    When installing/reinstalling tubes, I remove the stem core, and inflate the tube about half way inside the seated tire to help smooth out any wrinkles. Then I reinstall the core, and inflate it fully. That methodology seems to help minimize folds and pinches for me.
    Chas
    TiLite TR3
    Dual-Axle TR3 with RioMobility DragonFly
    I am a person with mild/moderate hexaparesis (impaired movement in 4 limbs, head, & torso) caused by RRMS w/TM C7&T7 incomplete.

    "I know you think you understand what you thought I said, but what I don't think you realize is that what you heard is not what I meant."
    <
    UNKNOWN AUTHOR>

  5. #5
    I just had the exact same issue, they sent me these huge wide tubes for looks like off road tires and here I am putting them in these thin 1 inch wide 540's, don't ask me why, but they seem to work fine. They must have a glut of the wide tubes they are trying to get rid of. Was it Sportaid by any chance?
    "Life is about how you
    respond to not only the
    challenges you're dealt but
    the challenges you seek...If
    you have no goals, no
    mountains to climb, your
    soul dies".~Liz Fordred

  6. #6
    Senior Member jschism's Avatar
    Join Date
    Aug 2010
    Location
    illinois, and no, chicago is not anywhere near where i live
    Posts
    2,167
    like what has been said, should be fine. When you have a problem with the universal size tubes is after you have inflated them in a larger width and then try and use it again with a narrower. like when going from a 1 3/8 to a 1", they don't do well after being stretched out.

Similar Threads

  1. tube size
    By djrolling in forum Equipment
    Replies: 3
    Last Post: 03-02-2012, 11:38 AM
  2. Help with correct tube size
    By joe423 in forum Equipment
    Replies: 11
    Last Post: 09-30-2011, 03:52 AM
  3. Wheel size - why choose 24, 25, or 26?
    By chasmengr in forum Equipment
    Replies: 18
    Last Post: 03-02-2011, 02:23 PM
  4. Quads getting beds bigger than twin size
    By EyesOfTexas in forum Equipment
    Replies: 10
    Last Post: 02-22-2011, 04:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •