Quote Originally Posted by nofuss View Post
Attachment 45003
TILITE ZR
SATIN FINISH, BLACK ANODIZED PARTS
16" WIDE X 16" DEEP
NO TAPER IN SEAT
+1" FRAME DEPTH, NCO
85º FRAME
SEAT HGT 19” FRONT, 16.5" REAR
TITANIUM FOOTPLATE W/ FLAT ABS COVER
SEAT TO FOOTPLATE 16.5"
"V" STYLE FRONT END, 11" WIDE
TITANIUM FOLDING BACK, ADJ. HGT & ANGLE, LOCKING BACK
BACK HGT 12”–16.5", SET @ 14"
BACK ANGLE SET @ 92º
CARBON FIBER BACK RELEASE BAR, 4" RIGIDIZER BAR
CENTER OF GRAVITY 3.25"
1" REAR WHEEL SPACING
0º CAMBER
CARBON FIBER CAMBER TUBE
SLIPSTREAM FORKS, TITANIUM STEM BOLTS
5”X1.5" PLASTIC/POLY WHEELS – UPGRADED TO 5 X 1.4 R6 BRG FLAHSRs
25" ORANGE SPOKE SPINERGY LX REAR WHEELS, BLACK HUBS
STAINLESS STEEL QUICK RELEASE AXLE
SCHWALBE MARATHON PLUS TIRES
SURGE LT HANDRIMS, SHORT TABS
COMPOSITE SCISSOR WHEEL LOCKS
TENSION-ADJUSTABLE-BY-STRAPS BACK UPHOLSTERY
SIDE GUARDS – NONE
G10 SOLID SEAT PAN
User Spec’s: 6’2”, 175#, advancing CIDP (no SCI), strong trunk, limited walking

OF INTEREST:

FRONT CASTERS: Upgraded to 5 x 1.4 R6 FLAHSRs, available special order from Frog Legs to fit TiLite Slipstreams equipped with 1.5” axles and plastic/poly casters. Conversion requires 1 allen wrench and 2 minutes of time. CAMBER CLAMP: Mounted more aft on the camber strut than usual. The center line of the camber tube runs up thru the extreme aft portion of the strut rather than thru the center, per the CAD.

SURGE LTs: A good wrap for 8” (base of palm to middle finger tip) average-sized hands. The short tabs work well, the whole upper and lower thumb flank resting close against the tire sidewall for more grip when needed, the narrow rim-to-tire gap thumb-friendly.

BOTTOM LINE: The chair fits fingertips to axle, foot to footrest (maybe up ½”). NO WAY could I have accurately spec’d my ZR without the CC forum and “Repository”. I thank all who regularly post, epecially those who collectively asked all the ‘dumb’ questions I would have had to ask, had you not … if that makes any sense. ;¬)
love it.