Search:

I took midodren for years. Small dose, one 5mg tablet per day. I got to where I didn't need it and stopped about 6 months ago. I seemed to have no side effects from taking it or from stopping...

I have used ADI gloves for years. I like them but wear them out very quickly. The contact areas in the palms are made of the same very thin and soft leather used on the backside of the glove. I am a...

I have no first hand experience with Quickie forks and casters. Sorry. But if what you are describing is your fork becomes harder to turn when you rotate it one direction, and that would be clockwise...

Success! We took the stem out and a spacer was visible between the inner races of the two ball bearings. Obviously, with the spacer in there tightening the shaft wasn't going to accomplish much. I...

This was all before sci, but I had a trigger finger on my middle finger, right hand. I lived with it for about a year and then tried the injection (I think cortisone) with no benefit. Then I had the...

Many years ago, pre-sci, my urologist prescribed allopurinol after I had two episodes of uric acid stones. I took the drug for about a year then quit. I don't know if it made any difference but I...

On a ZRa

Sounds like your highest priority could be to find a cushion to protect your butt where the sore is, letting you work sitting up. If the sore is on your ischial, then a cushion like the Ride Designs...

I found some old 2009 threads confirming that the problem and solution are exactly what I recalled--just need more dampening. Now I just need to figure out why on my current Uni-tine the adjustment...

I think this has been discussed but I can't find it. I want to tighten the pivot bearing to provide some damping to reduce wheel flutter at higher rolling speeds. I have done this in the past (with...

I found two half clamps. They are identical and both have fasteners so I'm assuming they're both inner or both outer. They have counterbored slots for the fasteners, probably 10-32 unless they're...

I switched to the composite brakes a few years ago. If I can find these brackets in my recycle box you can have them. I have a nine-year-old ZRa so they would probably work for you.

When I bought my Honda Odyssey, a mechanic at the dealer welded up a steel bracket to hold my Tilite ZRa with the EZlock. This was simply to hold it in location after I had transferred to the Odyssey...

The hurricane's eye track was about 100 miles north of Nassau, but it would still be prudent to get confirmation that the facility is in good shape.

I had shingles when I was aged 60. The blisters were quite a bit larger than what you show. And over a larger area, though I believe that varies a lot.

GJ, of GJNL, posted many times with useful information on choosing leg bags and foley catheters, promoting the dual balloon type. A search might turn up some of those posts.

This is a pic of a home-made EZ Lock bracket for a ZRa. Something similar could be made with a wider spacing between the two vertical tubes to leave room for the ZX1 clamp. I considered that for...

Thanks, I will.

Don't test it. it's got the trojan virus.

Does anyone have one available, either in electronic format or on paper? I have searched on the web for it but only found a bunch of links inhabited by malware. Apparently the folks that do that know...

I am C7, 9 years post and have a one mile neighborhood loop that I do routinely. It includes two challenging hills. In cooler weather I'll do it 2 to 4 times a day. In hot weather, I'll do once...

If he likes to read but struggles with holding a book, you could help with setting up with some sort of ebook, like a Kindle. That is so much more relaxing to me than struggling holding a paperback....

I use an electric blanket to preheat the bed, turning it on about an hour before bedtime. I rarely sleep with it on.

I use a transfer board at home in and out of bed and on and off the shower chair. I also take it along when traveling, mostly for those tall hotel beds. Otherwise I transfer without it. I could make...

That bar would be a deal killer. My travel chair has one. Activeaid has none. Depending on the devices I was using at the time, I've tried front, side, and back openings. Currently, using no stim and...