smokinn.babe
10-06-2010, 09:06 AM
I would like to request the help of senior members in this forum regarding ZR SII.
I ordered the wheelchair without wheels and the axle sleeve will be spec'ed for a Spinergy LX.
I also ordered a pair of HHR3 wheels. It's likely that both wheelsets will have different axle length. While I do not know what the axle length is for the HHR3 (I can't seem to get any info off the www), I was just wondering what if the axle sleeve for the HHR3 is different from the Spinergy LX?
From the TiLite parts website, it looks like the sleeve is screwed into the camber plugs which is then 'glued' into the CF Camber Tube (Yes I got the superlite edition...Gulp!)
Assuming the HHR3 comes with its own proprietary axle sleeve, does it mean I am unable to insert it into the Plugs?
I am currently sitting on Quickie GTX, where the axle sleeve is bolted down with 2 bolts, which makes the exchange easy. But with the ZR, it does not seem like there are any bolts to clamp the axle sleeve.
Am I correct to assume that the only way to fit the OX (assuming the Axle sleeve is not changeable) is to get a correct size/length/width axle?
TiLite does not spec'ed the axle sleeves for OX btw.
See the following: http://estore.tilite.com/ecommerce/PDF%20Files/CURRENT%20PDF%20FILES%201-9-08/6-1.pdf
I ordered the wheelchair without wheels and the axle sleeve will be spec'ed for a Spinergy LX.
I also ordered a pair of HHR3 wheels. It's likely that both wheelsets will have different axle length. While I do not know what the axle length is for the HHR3 (I can't seem to get any info off the www), I was just wondering what if the axle sleeve for the HHR3 is different from the Spinergy LX?
From the TiLite parts website, it looks like the sleeve is screwed into the camber plugs which is then 'glued' into the CF Camber Tube (Yes I got the superlite edition...Gulp!)
Assuming the HHR3 comes with its own proprietary axle sleeve, does it mean I am unable to insert it into the Plugs?
I am currently sitting on Quickie GTX, where the axle sleeve is bolted down with 2 bolts, which makes the exchange easy. But with the ZR, it does not seem like there are any bolts to clamp the axle sleeve.
Am I correct to assume that the only way to fit the OX (assuming the Axle sleeve is not changeable) is to get a correct size/length/width axle?
TiLite does not spec'ed the axle sleeves for OX btw.
See the following: http://estore.tilite.com/ecommerce/PDF%20Files/CURRENT%20PDF%20FILES%201-9-08/6-1.pdf